Light switches and thermostat are located at the blue arrow on the diagram.

There are 5 exit doors, as indicated on the diagram.

• Door #1 is the main door and should be unlocked with the key
• Door #4 should be unlocked by turning the lock button to vertical and lifting up on the handle. The button will pop out.
• The other 3 doors do not need to be unlocked, but can be used as exits.

• Lock door #4 by pressing in the button and turning it horizontal.
• Check the other 3 doors to be sure they are locked and closed.
• Lock door #1 with the key.

The thermostat is set on a timer and will run automatically during normally scheduled times. State law requires the fan to be on while the building is occupied and that is the normal setting.

If you are in the building during times other than the normal Sunday & Wednesday hours, you can override the settings by pressing the override button located below the Up & Down buttons.

The Override button is used to force the thermostat from Unoccupied mode into the Occupied 1 mode comfort settings. The Override period will be set at 30 minutes. The thermostat will then return to Unoccupied mode. To increase the amount of time in Override mode, press the Override button again. Thirty minutes of override time will be added for each time the Override button is pressed up to a maximum of 4 hours. After the 4-hour limit has been reached, press the Override button again to cancel override mode.

While in Override mode, the Override icon and the Occupied 1 icon will be displayed on the thermostat. The time of day and the minutes remaining in Override mode will alternate on the thermostat display.

The instruction manual for the thermostat is here: thermostat.pdf